Welcome to StruSoft Jigi
Jigi gives users the possibility of both two and three-dimensional frame modeling, analysis & design. The essential keywords of Jigi are simplicity and efficiency. The user interface is fully graphical and provides easy-to-use tools for quick modeling and easy overview of model incl material, loads, and results. Jigi is suitable for both building structures as well as mechanical support structures.
Statics
- 3D Statics
- Automatic load cases
- Automatic combinations
- 5000 cross-sections
- DXF Import
- Finnish national annexes
- Swedish national annexes
- Eurocode general
- Languages: English, Swedish, Finnish
- Steel, Timber, Concrete
Do you want to see how Jigi can simplify and increase your efficiency of both two and three-dimensional frame modeling, analysis & design?
Are you interested in finding out more, or would you like a showcase? Click Get started now.
Steel EN 1993
- Cross-section Classification
- Shear
- Torsion
- Bending
- Bending-Shear-Torsion interaction
- Stress Analysis
- Buckling
- Lateral Torsional Buckling
- Torsional Buckling
- Bending-Buckling Interaction
- Deformations
Timber EN 1995
Concrete EN 1992
- Creep and drying modification
- Concrete cover
- Second-order effects
- Lateral loads EN 1992-1-1
- Shear rebars
- Shear without shear rebars
- Torsion
- Bending-Normalforce-shear
- Bi-axial interaction
- SLS Stress checks
- Cracked and non-cracked stiffness
- Crack control
- minimum reinforcement areas
- minimum shear areas and spacing
- Non-linear deformations creep, cracks
Footing EN 1992
- Eccentric footings
- Pressures
- Internal forces
- drying modification
- Bending
- Shear
- Cracking
- Punching with edges
- Rotational stability
- Bearing pressure EN 1997
- Allowed pressure SLS
- Concrete cover
Truss Joint EN 1993
- T, K, Y, X joints
- RHS and CHS diagonals
- Face failure
- Diagonal failure
- Side wall buckling
- Punching
- Welds
- Geometric checks
01.07.2020
StruSoft acquires Jigi and starts Strusoft Finland branch office
Finland's leading software for Frame analysis and design – Jigi, developed by VirtualSystems Oy, is now a part of StruSoft.
Jigi users will benefit from StruSofts wide range of products and markets around Europe. Joni Hytönen, developer of Jigi, join the StruSoft family, as country manager in Finland. Joni has a broad experience in engineering, StruSoft products as well as many other engineering software.
”Almost every country has a software suite, fitted to the local market, language and traditions. We embrace that. We are happy to contribute to the further development and the survival of the Jigi Software, in the future. Joni Hytönen, (programmer of Jigi), shares our vision and beliefs and who represents StruSoft values as a customer-driven success manager, that can take the leadership of the business for the decades to come.” said Dennis Kristensen CEO at StruSoft
“During many years, I have seen StruSoft attractively positioned as the market leader in the Nordics. Together we will strengthen the Finnish market for Strusoft products and local support. Bringing Jigi to Strusoft will give new opportunities for both our software as well as strengthen the existing relations. I am very happy to be a member of the StruSoft family” said Joni Hytönen.
Jigi 4.9.3 Julkaistu
11.4.2019
Fixes to Concrete shear, torsion, bendign interaction Download Jigi 4.9.3
Jigi 4.9.2 Published
18.1.2019
Bug fixes to footing column shear calculations and concrete shear calculations. Text scaling.
New Features under developement
22.1.2019
In next release anchorage calculations and verification for rebars will be done according to EN 1992-1-1.
Jigi 4.9 Published
18.1.2019
Improved lateral torsional buckling calculations for steel cantilevers. Improvements to user interface. Bug fixes to steel, concrete and timber dimensioning.
Jigi 4.8.3 Published
17.8.2018
Timber creep calculations added. Bug fixes to footing calculations, concrete and steel design. Download Jigi 4.8.3
Jigi 4.7.8 Published
3.10.2017
Interaction factor modification for biaxially loaded concrete columns. Shearforce reduction of column footings at support. Minor bug fixes.
Jigi 4.7.7 Published
17.8.2017
Bug Fixes: Minimum reiforcement of inverted T-sections and support of compressed rebars. Foundations verifications with allowed pressure.
Jigi 4.7.5 Published
1.6.2017
New features: improved concrete cover check, new rebars and shear rebars division algorithm. Bug fixes: 4 wall supported timber floor vibrations calculation and minor fixes.
Videos published
29.5.2017
New help videos of concrete and steel design have been published in youtube channel and webpage. Steel truss frame and concrete frame. www.jigi-soft.fi
New website published
10.4.2017
New website of Jigi has been published. Latest version of Jigi can be directly downloaded from the site. www.jigi-soft.fi
Jigi 4.6.4 Published
6.4.2017
Bug Fixes: some setup packages did not have shape files for inverted T concrete sections, Concrete second order effects with sway modes.
New Features under developement
28.3.2017
Minimum reinforcement areas, minimum shear areas, concrete stress checks and reinforcements stress checks in service limit state.
Jigi Setup Problems
27.3.2017
Close all instances of Jigi before installing updates.
Jigi 4.6.3 Published
23.3.2017
New feature: User can switch off auto reiforcement distribution.
Jigi 4.6.2 Published
23.3.2017
Modifications: manual buckling lenght to concrete members and rebar radius listing in report. Glue laminated timber gamma factors and kcr factors have been modified in Finland.
Jigi 4.6.1 Published
23.3.2017
Bug fixes: Some computer had issue with zoom in 3D view. Moment zero points at beam ends might cause no tesion reinforcement at beam ends.
New Features under developement
7.3.2017
Under development: National annex of Denmark, automatic concrete cover with environtment class, drying curvature of concrete, minimum reinforcement EN 1992 and capacity
plots to steel and timber reports.
Jigi 4.6 Published
6.3.2017
New Features: Steel interaction method A, new concrete dimensioning, new concrete report, interaction of bixaially loaded concrete (capacity surface 3D), new footing report, Swedish national annex steel, timber and concrete, New concrete cross sections: circular, L, inverted T. New reinforcement styles (bundles, layers), Automatic reinforcement placement and sheer division, new concrete report, accurate displacement with creep factor and stiffness plots. Concrete strenght time reductions, Automatic lateral loads to concrete sway conlumns. Concrete torsion dimensioning and shear-torsion-bending interactions, Footing punching bug fixes and New Finnsih national annex to punching. Pucnhing circumference calculation and reduction factor corrections, New dialog to footing design. Footing strenght time reductions, New load combination generator. Possibility to imput meny wind directions to statics model. Added new environment classes, new cracking control to concrete.
Jigi 4.3 Published
25.6.2016
New Features: Edit tools: copy, mirror, skale 1D and 3D, array, division and many others.
Jigi 4.0 Published
4.1.2016
Version 4.0 published today. New features like welded truss joint dimensioning and automatic bending moment shape selector for timber and steel.
Jigi 3.9 Published
16.12.2014
New features: Cross section classification EN 1993-1-1, steel torsion and torsional buckling EN 1993-1-1, Stress analysis for steel, new welded user steel tube profiles. Timber: local pressure at support and lateral torsional buckling. For concrete bug fixes to second order moments. modifications to the steel and timber reports. Displacement limits to elements. Modifications to 3D graphics.
Jigi 3.2 Published
18.3.2014
New features: Modified lateral torsional buckling (plastic modulus), Licens module updated, report languages: swedish and Finnish. Timber vibrations check, Cloud based lisence management, lisence by activation key.
Jigi 2.9 Published
27.4.2012
New features: Footings and undo / redo
Jigi 2.5 Published
1.6.2011
New features: Steel dimensioning, timber stress dimensioning, Concrete crack control, DXF-import.
Jigi 1.0 Published
15.4.2010
First public version. Statics 3D and concrete dimensioning.
If you have any Jigi related support questions, you can always contact our support team.
| Support and Sales: | |
|
Joni Hytönen joni.hytonen@strusoft.com |
|
Click Get started now.