Powerful, but easy-to-use, structural engineering software for common design tasks.
Powerful, but easy-to-use, structural engineering software for common design tasks.
Foundation Calculations
Foundation Calculations in WIN-Statik
Below is all the information you need for Foundation Calculations!
The program can handle slabs with a column or a wall on top.
The adequate geometry and loads are defined. Up to ten different ULS or SLS load cases can be defined. In this case a load case with a vertical force and moments around both axes.
The soil and other data involved in the calculation of the ground pressure capacity are defined, in this case a normally consolidated clay.
Ultimate Limit State
The ground pressure acting on the effective part of the slab is calculated for each load case.
Ultimate Limit State results in terms of ground pressure check, shear check and required bending reinforcement are shown numerically.
Required bending reinforcement shown graphically.
The punching check is performed at four different control perimeters as well as at the column perimeter. In this case the reinforcement at the column area has to be increased as also seen above at the graphical display.
Available anchorage lengths are satisfactory and no end hooks has to be used.
Serviceability Limit State
For load cases in the Serviceability Limit State crack widths are calculated.
If the crack width is too large a crack width design can be performed. Three different crack criteria’s are available. In this case the allowed crack width is 0.2 mm.
The reinforcement is increased to produce a crack width of maximum 0.2 mm.
Settlements
To calculate settlements the soil is divided in a number of layers.
And the relevant data is defined for the clay.
In this case the settlement is sufficient for the SLS load case but not for the ULS load case.
Finally when the results are satisfactory the output can be sent to a printer.
Why wait? Apply below to download a trial license of WIN-Statik and get started on your journey today!
Calculations can be performed according to:
Euro Code- Danish national annex
- Finnish national annex
- Norwegian national annex
- Swedish national annex
- British national annex
Euro Code
Danish national annex
Finnish national annex
Norwegian national annex
Swedish national annex
British national annexWIN-Statik Blog
98% of Users satisfied with StruSoft Support
Support for FEM-Design and WIN-Statik, gets a very high rating from our Users. We continuously measure if our customers are satisfied with the support [...]
Impressive high rise building design supported by FEM-Design
Investments in excess of 100 BSEK are planned for the various high-rises in the city. Just around the corner from StruSoft’s Gothenburg offices, one [...]
Bio: Mikael van de Leur is the Head of Sales at StruSoft, for the Structural Business Unit. He has been with StruSoft since 1995 and has ...show more many years hands-on experience in all our different structural software, as well as in customer relationships and sales. Mikael coordinates the Structural Sales Team and Customer experience for new customers in StruSoft’s International markets. show less
Bio: Isak Björhag works as Business Development Manager for new markets. Isak has many years of experience both with hands on practical engineering and working with our ...show more customers helping them to succeed with our structural engineering software. This can be achieved through specific training, presentations or hands on demonstrations for specific cases. Please feel free to contact Isak if you are interested in a demo or want to expand your knowledge in our structural software. show less
Bio: Mohsen Ghaemi is the Regional Manager for StruSoft in our Structural Business Unit. He has a PhD in Structural Civil Engineering (Topology optimisation). Mohsen has ...show more been with StruSoft since 2002 and has more than 20 years of experience with the FEM-Design software and its development, as well as in customer relationships and sales. Please feel free to get in touch with Mohsen directly. show less
Bio: Ciprian Tibea is the Sales Manager for Baltics & Romania and has been with StruSoft since 2018. Ciprian has a PhD in Civil Engineering (Ultra ...show more High Performance Concrete Subjected to Shear Action) and a Masters Degree in Entrepreneurship and Business Administration. Prior to StruSoft, Ciprian was working as a research engineer for Consolis for 6 years and for 1 year with a local company in Romania working on structural design projects with advanced Finite Element Software (Diana and Atena). Ciprian is your main Structural Sales contact for markets outside Europe, the Baltics and Romania. Please feel free to get in touch. show less
Bio: Marek Krawczyk is the Country Manager for Poland at StruSoft. As a structural engineer, he has more than ten years of international experience, working on ...show more various projects in Europe, the UK, the USA and Asia. He joined StruSoft in 2022 to strengthen our presence in Poland and support the StruSoft software Users in the local market. show less
Bio: Jan Wróbel has over 6 years prior experience before joining StruSoft working as a structural engineer, using FEM-Design and WIN-Statik in his daily practice. His ...show more international project work has equipped him with broad technical knowledge and understanding of various design standards and client needs. He is now focusing on technical support for Polish customers. Feel free to contact Jan for any assistance with StruSoft's structural software or any other structural engineering questions! show less
Bio: Edris Mohammadi Nikzad is a Costumer Success Manager at StruSoft, based in our Stockholm’s office. He joined StruSoft in 2019 and has many years of ...show more experience on practical engineering and working with FEM-Design and WIN-Statik. Edris works closely with our customers in Sweden to help them to succeed with our structural engineering software. If you are interested in a demo of our calculation programs for a specific purpose, or if you have a special request for any training, please feel free to contact Edris. show less
Bio: Fredrik Lagerström MSc has 8 years prior experience before joining StruSoft working as a civil engineer using FEM-Design, WIN-Statik & PRE-Stress in his daily practice. ...show more In 2011 Fredrik joined StruSoft as a Technical Sales and Education Manager. Fredrik works closely with both Sales and Development to get feedback directly from our Swedish Customers to in turn help our Developers to implement the requested new features in an accurate way. Please feel free to get in touch with Fredrik if you require any technical help or support with our structural software. show less