Punching
Punching capacity for corner, edge or interior columns can be calculated for three different load cases simultaneously. If the concrete capacity is exceeded and requires shear reinforcement in the form of bended bars, or stirrups, this can also be calculated.
Pease see the Calculation Instructions for a guide on how to use the Punching module in the WIN-Statik program.
Why wait? Apply below to download a trial license of WIN-Statik and get started on your journey today!
Watch the Training Video Series about Punching
WIN-Statik Wiki
Full technical details and the theory behind the Punching module can be found on the WIN-Statik Wiki by clicking here.
Calculations can be performed according to:
EuroCode
Danish national annex
Finnish national annex
Norwegian national annex
Swedish national annex
British national annex
WIN-Statik Blog
Buckling of Concrete | WIN-Statik Tips & Tricks
In a previous WIN-Statik Tips & Tricks post, we explained three methods for calculating the buckling of concrete according to EC2. These were the [...]
Masonry Walls as Stabilisation – A Quick Design Guide
In Sweden, the Masonry Wall is mostly used as a shell wall, i.e. as climate protection. In our neighbouring countries, on the other hand, [...]
98% of Users satisfied with StruSoft Support
Support for FEM-Design and WIN-Statik, gets a very high rating from our Users. We continuously measure if our customers are satisfied with the support [...]